Important safety instructions – please read carefully
CAUTION !
Dangerous tension inside the product ! Do not open. Risk of electric shock !
No parts can be repaired by the end-user. Only qualified personnel can repair
and maintain this product.
If the electric cord is damaged, it must be replaced by the manufacturer or qualified
after-sales personnel in order to avoid any danger.
The product must be installed in accordance with local laws.
Damaged batteries must be properly disposed. In order to protect the environment,
please dispose the batteries properly, in accordance with local laws (information is
available at your reseller).
Remote control battery (included) shall not be exposed to excessive heat (e.g. from
sun or fire).
Note: Device operates in frequency range 2454-2483.5MHz is restricted to indoor
use in France
Where to install the product
- Place the product on a straight, rigid and stable place. Do not place the product
on a carpet.
- Do not place the product on top of another that may cause overheating (for
example, a receiver or amplifier).
- Do not place anything underneath the product (for example, CDs or magazines).
Proper ventilation
- Place the product in a sufficiently–aerated place to avoid overheating. Allow at
least 10cm spacing at the back and top of the product, and 5cm spacing on both
sides to prevent overheating.
- Do not place items such as newspapers, tablecloth, curtains, in front of the
ventilating openings.
and keep for future reference
To reduce the risk of fire or electric shock, do not expose this
product to water, rain or moisture. To prevent the risk of
electric shock, do not remove the cover or back of this
product. In case of product failure, only qualified personnel
can repair. There are no user-serviceable parts inside.
- 19 -