Schneider GROOVE CINEMA Manuel D'utilisation page 29

Standby mode
1. Press the STANDBY button to wake the unit from STANDBY mode.
2. To enter STANDBY mode, press either STANDBY buttons.
NOTE: As part of the power saving mode the unit will enter STANDBY mode
automatically after 20 minutes (approx.) of no audio output.
Status LED
Operation Description
STANDBY Standby
AUX
Bluetooth-ready for
pairing
SOURCE
Bluetooth paired
Coaxial
Optical
Adjust sound
VOL+/-
volume
BASS +/- Adjust bass level
Assign sound EQ
EQ MODE STANBARD or
MOVIE
Mute or restore
MUTE
sound
Switching inputs
Follow the below steps to switch inputs among: Auxiliary, Bluetooth, Coaxial or
Optical.
1. Ensure the Sound bar is powered ON by pressing the STANDBY button.
2. Press the SOURCE button repeatedly until you see the corresponding color on
the indicator, and then an audible message will follow to confirm the source you
selected.
Auxiliary input: ...........................GREEN
Coaxial input: .............................WHITE
Bluetooth input: ..........................BLUE
Optical input: .............................PURPLE
LED Status
RED (solid)
GREEN (solid)
BLUE (flash)
BLUE (solid)
WHITE (solid)
PURPLE (solid)
Current input source color (blink once)
Current input source color (blink once)
Current input source color (blink once)
RED (flash)
- 28 -