Schneider GROOVE CINEMA Manuel D'utilisation page 27

4.3 DIGITAL connection to a TV, DVD or Blu-ray player using the OPTICAL
cable (not provided).
1. Connect one end of the OPTICAL cable to the TV, DVD or Blu-ray OPTICAL
audio output socket.
2. Connect the other end to the OPTC input on the side of the Sound bar.
NOTE: You may need to activate PCM (Downmix) on your source device: TV, DVD
or Blu-ray player.
4.4 Connection to a TV using the 3.5mm-3.5mm audio cable.
1. Connect one end of the 3.5mm cable to the TV headphone 3.5mm audio output
socket.
2. Connect the other end of the cable to the AUX input on the back of the sound bar.
NOTE: In some cases the Sound bar volume output is affected by the volume level
on the TV. In this case adjust the TV volume to increase the audio output from the
sound bar.
- 26 -