Ottobock 1D35 Dynamic Motion Instructions D'utilisation page 7

9 Rechtliche Hinweise
Alle rechtlichen Bedingungen unterliegen dem jeweiligen Landesrecht
des Verwenderlandes und können dementsprechend variieren.
9.1 Haftung
Der Hersteller haftet, wenn das Produkt gemäß den Beschreibungen
und Anweisungen in diesem Dokument verwendet wird. Für Schäden,
die durch Nichtbeachtung dieses Dokuments, insbesondere durch
unsachgemäße Verwendung oder unerlaubte Veränderung des Pro­
dukts verursacht werden, haftet der Hersteller nicht.
9.2 CE-Konformität
Das Produkt erfüllt die Anforderungen der Verordnung (EU) 2017/745
über Medizinprodukte. Die CE-Konformitätserklärung kann auf der
Website des Herstellers heruntergeladen werden.
10 Technische Daten
Größen [cm] 22
Absatzhöhe [mm]
Systemhöhe [mm] 57
Produktgewicht [g] 3­
40
Max. Körperge­
wicht [kg]
Mobilitätsgrad
1 Product description
INFORMATION
Date of last update: 2020-06-03
► Please read this document carefully before using the product
and observe the safety notices.
► Instruct the user in the safe use of the product.
23 24 25 26 27 28
10 ±5
60 63 66 68 72 74
4­ 5­ 5­ 6­ 6­ 6­
35 10 45 30 45 70
75 100
2 und 3
► Please contact the manufacturer if you have questions about the
product or in case of problems.
► Report each serious incident in connection with the product, in
particular a worsening of the state of health, to the manufacturer
and to the relevant authority in your country.
► Please keep this document for your records.
1.1 Construction and Function
The prosthetic foot 1D35 Dynamic Motion is delivered with an integ­
rated modular adapter made of aluminium.
The functional properties of the prosthetic foot are achieved through
the spring element made of plastic and functional foam elements. The
prosthetic foot permits perceptible plantar flexion at heel strike and a
natural rollover movement. Stored energy is released by the spring
element.
1.2 Combination possibilities
29 30
This prosthetic component is compatible with Ottobock's system of
modular connectors. Functionality with components of other manufac­
turers that have compatible modular connectors has not been tested.
75 77
7­ 7­
2 Intended use
30 55
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fit­
tings.
2.2 Area of application
Our components perform optimally when paired with appropriate
English
components based upon weight and mobility grades identifiable by
our MOBIS classification information and which have appropriate
modular connectors.
The product is recommended for mobility grade 2 (restric­
ted outdoor walker) and mobility grade 3 (unrestricted out­
m°
kg
door walker).
7