ATTACHING THE STRAP
1
Thread the short end of the strap
through the strap eyelet.
2
Thread the long end of the strap
through the loop that has already
gone through the eyelet.
3
Pull the strap tight, making sure
that it is securely fastened and
does not come loose.
LOADING THE BATTERIES
1
Make sure that:
• The monitor is off.
• The lens barrier is closed.
• The lamp on the right of the viewfinder is off.
2
Slide the battery compartment
lock from
3
Slide the battery compartment
cover in the direction of
direction indicated by the
mark on the cover), and lift it up
in the direction of
4
Insert the batteries, making sure that they are correctly
oriented as shown in the illustration.
When using AA (R6) batteries
Battery
insertion
direction
mark
There is a mark showing the
correct way to insert the AA
batteries on the bottom of the
camera.
to
.
(the
.
Strap eyelet
When using CR-V3 lithium battery
packs
When using lithium battery
packs, insert them so that the
"CAMEDIA" label on each
battery is facing the lens side of
the camera.
En
En 9