Error Codes - Olympus CAMEDIA C-300 ZOOM Manuel De Base

Monitor
En
NO CARD
CARD ERROR
WRItE - PROtECt
CARD FULL
NO PICtURE
PICtURE ERROR
CARD%SEtUP
POWER%OFF
FORMAt
SELECt GO
40 En

ERROR CODES

Possible cause
The card is not inserted, or
it cannot be recognized.
Cannot record, play back
or erase pictures on this
card.
Writing to the card is
prohibited.
There is no empty space
on the card, so no more
pictures can be taken.
There is no empty space
on the card, so it cannot
record new information
such as print reservation
data and other functions.
There are no pictures on
the card.
The selected picture
cannot be played back on
this camera.
The card is not formatted.
Corrective action
Insert the card correctly, or insert a
different card.
Wipe the gold contacts with a piece of
cleaning paper (commercially
available) and insert the card again. If
the problem is still not corrected,
format the card. If the card cannot be
formatted, this card cannot be used.
Remove the write-protect seal
attached to the card. For more details,
refer to the provided instruction
manual for the card.
Replace the card or erase unwanted
pictures. Before erasing, download
important images to a PC.
Replace the card or erase unwanted
pictures. Before erasing, download
important images to a PC.
The card contains no pictures. Record
pictures.
Use image processing software on a
PC to view it. If that cannot be done,
the image file is damaged.
Format the card.