Arcam rPlay Connexions Et Guide De Démarrage Rapide page 11

Windows® PC Users
Option 1: My Router Supports Wi-Fi Protected Setup
1. Press and hold the SETUP button located on the rear panel of your rPlay for approximately 4 seconds. The NET
LED will blink twice at regular intervals.
2. Press the Wi-Fi Protected Setup
3. The rPlay will now connect to your network and the NET LED will stop blinking and stay on
4. Download the DTS Play-Fi app from https://play-fi.com/apps/windows/.
5. Connect your Windows device to the same network that the rPlay is connected to.
6. Launch the DTS Play-Fi app and follow the on-screen instructions.
Option 2: My Router Does Not Support Wi-Fi Protected Setup
1. Download the DTS Play-Fi software from https://play-fi.com/apps/windows/ and install it on your PC.
2. Once the installation is complete, click on the Settings icon
3. The app will automatically find your device and it will guide you through the set-up procedure.
4. The rPlay is now set-up and ready for use.
Option 3: Wired Connection To A Network
1. Download the DTS Play-Fi app from https://play-fi.com/apps/windows/.
2. Using the supplied Ethernet cable, connect the rPlay to your router.
3. Turn on the rPlay.
4. Connect your mobile device to the same network that you want the rPlay to be connected to.
5. Launch the DTS Play-Fi app and wait for the app to automatically detect the rPlay and connect it to your home
network.
6. The rPlay is now set-up and ready for use.
NOTE
Once the rPlay is fully configured, make sure that the rPlay is selected as the default Windows playback device.
button on your router.
and choose "Set-Up Play-Fi Device".
E-7