Arcam rPlay Connexions Et Guide De Démarrage Rapide page 14

Specifications
DAC
Frequency response
Total Harmonic Distortion + Noise 0.0007%
Signal-to-noise ratio (A-weighted)
Output level
Supported audio file formats
File quality (see note below)
Power requirements (max)
Dimensions (WxHxD)
Net weight
Supplied accessories
E&OE. All specification values are typical unless otherwise stated
NOTE:
Files up to 16-bit/48 kHz are streamed without compression or transcoding. High resolution audio files
(24-bit/192kHz), are down-sampled to 16-bit/48kHz for transmission. This allows for the most reliable streaming
experience over Wi-Fi to multiple speakers.
For those who wish to hear high resolution audio as originally intended, Critical Listening mode in the DTS
Play-Fi app will enable native rendering of high resolution files up to 24/96, without down-sampling or network
synchronization adjustment. In this way, audio files retain their original audio integrity. For more details regarding
the Critical Listening mode please refer to https://play-fi.com/faq/entry/critical-listening-mode.
Compatibility and System Requirements
• A Windows PC running Windows 7 or higher (32 or 64 bit)
• An Android device running Android 2.2 or higher
• Supports iOS 7 or later for setup using Wireless Accessory Configuration
• AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and
PC with iTunes 10.2.2 or later
• For optimal Play-Fi streaming experience, a wireless router rated at least N600 is recommended
E-10
Texas Instruments PCM5102
20Hz–20kHz
117dB
Fixed level 2.15V RMS
Variable level 0–2.15V RMS
mp3 (MPEG Layer III)
m4a, aac (Advanced Audio Coding / Apple Lossless)
flac (Free Lossless Audio Codec)
wav (Waveform Audio File)
Up to 24-bit/192kHz
12V DC, 2.0A
194 x 44 x 124mm
1.1Kg
Power supply with interchangeable plugs
Wi-Fi antenna
Stereo phono–phono cable
Digital phono cable
Ethernet cable
User manual and registration card