Light; Oven Light - Fisher & Paykel CMOH30SS Guide D'utilisation

CLEANING AND CARE

LIGHT

1. To replace light bulbs, fi rst disconnect power
to the oven at the circuit breaker panel or by
unplugging.
2. To release cover remove the screw on the light
cover. (See illustration.)
3. Replace bulbs only with 20 watt bulbs available
from a Fisher & Paykel Authorized Servicer or
parts distributor. Bulbs are also available at most
hardware stores or lighting centers. DO NOT USE A
BULB LARGER THAN 30 WATTS.
4. Close light cover and secure with screw removed
in step 2.
CAUTION: Light cover may become very hot. Do not touch glass when light is on.
Do not use light for long time use such as a night light.

OVEN LIGHT

1. Disconnect power to the oven at the circuit breaker panel or by unplugging.
2. Remove 3 screws that secure louver.
3. Remove louver by inserting fl at edge screwdriver over each tab depressing the tab down and moving
louver away from unit.
4. Pull the louver away from the oven.
5. Slide the light cover forward and lift up.
6. Remove old light bulb and replace only with 20 watt bulb available from a Fisher & Paykel Authorized
Servicer or parts distributor. Bulbs are also available at most hardware stores or lighting centers.
DO NOT USE A BULB LARGER THAN 30 WATTS.
7. Replace the oven light cover, push louver back in place and replace the louver mounting screws.
Light cover
Screw Light bulbs
33