Reproducing Stereo Sound - Yamaha DVX-S120 Mode D'emploi

More Information about DSP (Surround) Effects

Reproducing Stereo Sound

POWER
/DTS
NIGHT
TV CH
PRESET
ON SCREEN
CH
STATUS
TV VOL
DVD/CD
MOVIE
Advice
• An LFE channel can be output from the Front L/R Speakers or Subwoofer depending on how you set "* BASS" in the SET
MENU.
• If "* BASS" in the SET MENU is set to "BOTH" or "* FRONT" is set to "SML", a low tone is output from the Subwoofer.
Note
• If sound field effects are off, no sound will output from the Center Speaker or Surround L/R Speakers.
• The volume may become very low if you turn off sound field effects and set "* D. Range" to "MIN" in the SET MENU. In this
case, turn on sound field effects.
• If sound field effects are off and you play Dolby Digital or DTS audio, the volume balance of the Front L/R Speakers may be
disturbed. This is because the dynamic range becomes compressed and the channel sound set in "* Speaker Set" in the SET
MENU mixes and outputs with the front L/R channel sound.
74
DVR-S120 WB56650
POWER
TV
AUDIO ANGLE SUBTITLE
STEREO
SELECT MATRIX 6.1 STEREO
REPEAT A-B
SW CENTER SURR
SHIFT
TV INPUT
A B C D E
SLEEP
PRESET
MENU
SET MENU
CH
ENTER
RETURN
TEST
VOLUME
MUTE
AMP
AMP
VIDEO
VCR
TUNER
MUSIC SPORTS GAME
CINEMA
You can enjoy the 2-channel (stereo sound) source only
with the Front L/R Speakers.
Play the source.
Press AMP.
Press STEREO.
The STEREO indicator lights up in the CinemaStation
Display.
If sound field effects are off, you will have normal stereo
playback. Press STEREO once more to turn on the sound
field effect.