Homak Security HS30103630 Guide D'utilisation Et Directives De Fonctionnement page 2

Congratulations on your new purchase!
Inside your gun cabinet, you will fi nd the following items:
A) Keys
B) Foam Components
C) Plastic Barrel Rest Kit
Locate this instruction manual and keep in a safe place after
reading thoroughly. The factory key code can be found printed
on the back page of this manual. If this code is lost, please call
1-800-874-6625 for assistance.
1. Install the cabinet
Locate the four washers and
screws. Place the cabinet in
a suitable location aligning
the holes on the back of the
cabinet with two studs in the
wall that are 16" apart.
Pre-drill the holes into the
studs before permanently
installing cabinet.
NOTE: This cabinet is not
designed to be used without
securing it to a wall or other
surface. It may tip over.
THANK YOU FOR PURCHASING A
HOMAK SECURITY PRODUCT.
WE APPRECIATE YOUR BUSINESS.
MECHANICAL ASSEMBLY
D) 4 Screws
E) 4 Washers
F) 3 Bins
Mounting Holes
- 2 -
Door
Lock Cylinders