Using Your Ice Maker - Fisher & Paykel Ice & Water E522B Guide D'utilisation

Using your ice maker

US
24
CA
Ice maker
Your ice maker is designed to automatically dispense ice
until it senses that the bin is full. So the more ice you use,
the more it makes. It is even clever enough to sense when
there is no bin in place to catch the ice.
First use
When you first turn your refrigerator on after installation,
■ ■
the ice maker will be off.
To turn your ice maker on use the
■ ■
the screen.
Use the or
Shows the ice maker is on.
Shows the ice maker is off.
Press
■ ■
flip. Force another cycle. The ice tray will flip and spill the
water into the ice bin. Empty water and replace bin.
If the bin is full, or inserted incorrectly the ice maker will
■ ■
not operate. When the bin is inserted correctly the scoop
will be on the right hand side of the bin for models E522B
and the front of the bin for model RF201A (refer to Fig.23).
If all bins are removed the ice maker will not operate.
Once your ice maker is in operation, discard the first 3
■ ■
harvests of ice (8 cubes of ice are produced per harvest).
This will flush away any impurities in the water line and
ensure that you get the best quality ice. We recommend
that you also do this after vacations or extended periods
of not using ice.
We recommend that you turn the ice maker off if:
■ ■
– The water supply is to be off for several hours; or
– The ice storage bin is to be removed for a period of
time; or
– You are going on holiday/vacation.
button to turn the ice maker on or off.
together to force a cycle. The ice tray will
button to scroll to
Fig.22 Turning ice maker on
E522B
RF201A
Fig.23 Ice storage bin and
scoop in correct position