Sun Microsystems StorEdge PCI/PCI-X Ultra320 SCSI Guide D'installation page 23

3. Tapez analyze pour sélectionner le type de test.
FORMAT MENU:
disk
type
partition - select (define) a partition table
current
format
fdisk
repair
label
analyze
defect
backup
verify
save
inquiry
scsi
cache
volname
!<cmd>
quit
format> analyze
4. Tapez read pour définir davantage le type de test, puis yes pour continuer.
ANALYZE MENU:
read
refresh
test
write
compare
purge
verify
print
setup
config
!<cmd>
quit
analyze> read
Ready to analyze (won't harm SunOS). This takes a long time,
but is interruptable with CTRL-C. Continue? y
pass 1
Total of 0 defective blocks repaired.
analyze>
- select a disk
- select (define) a disk type
- describe the current disk
- format and analyze the disk
- run the fdisk program
- repair a defective sector
- write label to the disk
- surface analysis
- defect list management
- search for backup labels
- read and display labels
- save new disk/partition definitions
- show vendor, product and revision
- independent SCSI mode selects
- enable, disable or query SCSI disk cache
- set 8-character volume name
- execute <cmd>, then return
- read only test (doesn't harm SunOS)
- read then write (doesn't harm data)
- pattern testing (doesn't harm data)
- write then read (corrupts data)
- write, read, compare (corrupts data)
- write, read, write (corrupts data)
- write entire disk, then verify (corrupts data)
- display data buffer
- set analysis parameters
- show analysis parameters
- execute <cmd>, then return
Installation, connexion et test de l'adaptateur de bus hôte 15