JUKI MO-6804S Manuel D'utilisation page 44

Masquer les pouces Voir aussi pour MO-6804S:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 114
Precautions to be taken so as to use the MO-6800S Series more safely
1. So as to avoid electric shock hazards, do not open the cover of the electrical box of the
motor or touch any part inside the electrical box with the power to the machine turned ON.
1. To prevent possible personal injury, never operate the machine with the belt cover and the
eye guard removed.
2. To protect against possible personal injury resulting from being caught in the motor, use a
motor that is provided with a motor pulley cover.
3. To avoid electric shock hazards, never operate the machine with the ground wire for the
power supply removed.
4. During operation, be careful not to allow your or any other person's head, hands or ngers
to come close to the handwheel, V belt and motor so as to prevent possible personal injury
that may occur when your hands ngers are caught in the machine. Also, do not place any-
thing close to them.
5. So as to avoid possible injury to your hands and ngers, do not put any of them near the
cloth cutting knife and the needle when turning the power to the machine or while the ma-
chine is in operation.
6. To prevent possible injury to your hands and ngers, do not put any of them inside the eye
guard while the machine is in operation.
7. To avoid electric shock hazards and accidents arising from damaged electrical components,
be sure to turn OFF the power switch before inserting/detaching the power plug.
8. So as to protect against possible personal injury resulting from abrupt start of the machine,
make sure to turn OFF the power to the machine when you leave your machine.
9. In the event of a power failure, be sure to turn OFF the power to the machine to protect
against possible personal injury resulting from abrupt start of the machine.
10. So as to protect against possible personal injury resulting from abrupt start of the machine,
remove the belt cover, motor pulley cover and the V belt after turning OFF the power to the
machine and con rming that the sewing machine will not run even by depressing the start
pedal.
11. Before inspecting, adjusting or cleaning the machine, threading the machine head or replac-
ing the needle, so as to protect against possible personal injury resulting from abrupt start
of the machine, be sure to turn OFF the power to the machine so as to prevent an accident
and con rm that the sewing machine will not operate even when depressing the foot pedal
of the sewing machine.
12. In order to protect against personal injury due to a fall of the sewing machine head, never
carry the sewing machine by holding the cloth plate cover. If you carry the sewing machine
by holding the cloth plate cover, the cover can break to allow the sewing machine head to
fall resulting in personal injury.
13. Be careful of handling this product so as not to pour water or oil, shock by dropping, and
the like since this product is a precision instrument.
14. Please operate this machine in 80
gagement. After four weeks, please do not operate under the maximum speed until replacing
the new lubrication oil.
15. Periodically maintain and clean the machine to ensure and extend the usage term of the
machine.
of the maximum speed in the rst four weeks for en-
v

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mo-6814sMo-6816s

Table des Matières