Enjoying Through Usb Interface (Home Gallery Function); Readable Memory Cards; Readable Data Files; Connecting A Usb Device - Pioneer PDP-6072HD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Enjoying through External Equipment
12
Enjoying through USB interface (Home
Gallery function)
On this system, you can watch JPEG images that have been
captured and stored in memory cards using a digital still
camera. You can also connect your digital camera directly to
the Plasma Display using a USB connector cable.
Digital still
USB connector cable
camera
USB memory
Multi-card reader
NOTE
• A single USB device can only be connected at a time. No
USB hub can be connected.
• Such devices as a printer or keyboard cannot be connected
and used.

Readable memory cards

This system can read memory cards whose formats are FAT12,
FAT16, FAT32, or VFAT.

Readable data files

This system can read only JPEG files that meet the following
conditions:
• Extensions are JPG or JPEG.
• JPEG 4:2:2 and 4:2:0 format
• The image resolution must be less than 3264 pixels in the
horizontal direction and 2448 pixels in the vertical direction.
• The image resolution must be higher than 160 pixels in the
horizontal direction and 120 pixels in the vertical direction.
NOTE
• This system may not be able to display images, depending on
the type of your memory card.
• This system may not be able to display images modified or
edited using a personal computer or other equipment.
• This system complies with the USB Mass Storage Class.
78
En

Connecting a USB device

Side of the Plasma Display
Image data display

Removing a USB device

To remove a USB device's connector, quit the Home Gallery
screen and then remove it.
• For details on connectable devices, see Pioneer's website:
• Be sure to quit the Home Gallery screen before removing the
• Do not insert or remove the USB device immediately after the
• Do not turn the digital camera off while the Home Gallery
Hold the USB device's connector with its top side facing
the front panel, and then insert it into the USB port on the
side of the Plasma Display.
• Insert the USB device's connector as far as it goes.
• When using the USB connector of your device, connect
it directly to the USB port.
USB memory or
multi-card reader
NOTE
http://www.pioneerelectronics.com
USB device. If you remove the USB device while the Home
Gallery screen is displayed, data inside the memory may be
damaged.
system is switched on or off. This may cause data inside the
memory to be damaged.
screen is displayed.

Publicité

Table des Matières
loading

Table des Matières