Changing The Default Options - Pioneer PDP-6072HD Mode D'emploi

TV Guide On Screen™ System Operation
10
3
to highlight a channel then press ENTER to go
Press /
to the Grid Options menu.
From the Grid Options menu you can set:
• channel – On (display in channel list), Off (don't display)
or Auto Hide (hide when no program information is
available)
• service – the type of service that the channel operates
on (cable, etc.)
• tune channel – the channel number that the channel
listing is tuned to
• position – place that the channel appears in the
channel list
4
When you've made all the settings you want for the
channel, highlight "done" then press ENTER.
• To cancel without saving any of the changes you made,
select "cancel".
62
En

Changing the Default Options

This is the place to change the default settings for recordings,
reminders and other general settings.
1
Select the "Change Default Options" item.
2
Select one of the three default option categories.
A different panel menu appears for each option:
General default options
box size – the initial size of the Info Box (no, small,
•
large, last used)
• box cycle – the cycle behavior of the Info Box (no only, small
only, large only, no & small, no & large, small & large, all)
• auto guide – Display TV Guide On Screen™ guide
automatically when you switch on the TV (On, Off)
Record defaults
• start – when to start a recording (up to 120 minutes earlier
or later than the program start time, or On time)
• end – when to end a recording (up to 120 minutes earlier or
later than the program end time, or On time)
• recorder – selects a recorder to be used for recording.
Remind defaults
• auto tune – automatically tunes to the correct channel
when a reminder becomes due (Yes or No)
• when – when to display the reminder (15 minutes early to 15
minutes late, or On time)
3
When you've made all the settings you want, highlight
"done" then press ENTER.
• To cancel without saving any of the changes you made,
select "cancel".