Analog way Octo Vue FX Manuel Utilisateur page 36

Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
[AUDIO MAIN] + ENTER.
7
7-1 [Master volume] + ENTER.
Adjust the audio output level with
7-2 [Audio mode] + ENTER.
Select the output audio mode with
• [Mono]: Set the output in mono mode.
• [Stereo]: Set the output in stereo mode.
7-3 [Audio source] + ENTER.
Select an item with
• [auto follow]: The audio follows the video image.
• [input --]: The selected audio input is permanently diffused.
7-4 [Audio level] + ENTER.
This function allows to separately adjusting the level of each audio input. Adjust the level with
NOTE: This function acts on the selected (diffused) audio input.
7-5 [Audio balance] + ENTER.
This function allows adjusting for each input the audio balance. Adjust the level with
NOTE: This function acts on the selected (diffused) audio input.
7-6 [AUX input] + ENTER.
7-7 [Mute off] + ENTER.
Switch ON or OFF the audio output. Validate with ENTER.
8 [AUDIO PRELIST] + ENTER.
8-1 [Master volume] + ENTER.
Adjust the audio output level with
8-2 [Audio mode] + ENTER.
Select the audio mode of the output with
• [Mono]: Set the output in mono mode.
• [Stereo]: Set the output in stereo mode.
8-3 [Audio source] + ENTER.
Select an item with
• [auto follow]: The audio follows the video image.
• [input --]: The selected audio input is permanently diffused.
8-4 [Audio level] + ENTER.
This function allows to separately adjusting the level of each audio input. Adjust the level with
NOTE: This function acts on the selected (diffused) audio input.
8-5 [Audio balance] + ENTER.
This function allows adjusting for each input the audio balance. Adjust the level with
NOTE: This function acts on the selected (diffused) audio input.
8-6 [AUX input] + ENTER.
8-7 [Mute off] + ENTER.
Switch ON or OFF the audio output. Validate with ENTER.
PAGE 36
+ ENTER.
+ ENTER.
+ ENTER:
+ ENTER.
+ ENTER.
+ ENTER:
OCTO VUE / QUATTRO VUE
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.