Front Panel Description Of The Octo Vue - Analog way Octo Vue FX Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OCTO VUE / QUATTRO VUE

1-6. FRONT PANEL DESCRIPTION OF THE OCTO VUE

• OCTO VUE FX (OVX831)
• OCTO VUE FADE (OVF831)
• OCTO VUE (OVP831)
INPUT #8:
AUDIO L+R:
COMPUTER/TV/HDTV: Computer (RGBHV, RGBS or RGsB) or video (SDTV or HDTV) source on a HD15
S.VIDEO:
C.VIDEO:
Fn
(OVX831 & OVF831)
(OVP831 only)
BLACK
EFFECT PRESET :
(OVX831 & OVF831)
PIP PRESET :
(OVP831 only)
FREEZE :
LOGO
(OVX831 only)
INPUT SELECTION:
TAKE:
CONTROL
EXIT – MENU:
ENTER:
Universal (computer and video) input. This input accepts the following sources:
Audio stereo source on jack 3.5 female connector.
female connector.
S.VIDEO (Y/C) source on 4-pin mini DIN 4 female connector.
Composite Video (PAL, NTSC...) source on a RCA female connector.
Secondary function selection button.
:
Allows to display a black screen.
:
Selection of the 6 EFFECT PRESET.
NOTE: Effect preset #4, 5 & 6 can be used only when Fn is activate.
Selection of the 3 PIP PRESET.
Freeze the main output (the blinking LED indicates the FREEZE is active).
Allows to display logo onto the Main output.
:
NOTE: Logo display can be used only when Fn is activate.
• Selection of the 8 input sources: 1 to 8.
• Selection of the 4 frames: F1 to F4
NOTE: -Frame selection can be used only when Fn is activate (LED blinking quickly).
-The pre-selected source (LED blinking slowly) is displayed onto the PREVIEW
output.
-The pre-selected frame (LED blinking quickly) is displayed onto the PREVIEW
output.
-The source/frame displayed onto the MAIN output is indicate by a turn ON
LED.
• On the OVX831 and OVF831, a long push (1 second) on the selected/preselected input
button allows to active the BLACK function. A black screen is displayed onto the
corresponding output. A short push on the same button allows to inactive this function.
Allows to display the pre-selected source onto the Main output with the selected effect.
Allows to scroll thru the different menus (in Control mode).
Switches between Status and Control mode.
Validates a selected item.
Chapter 1 : INTRODUCTION (continued)
.
(OVX831 only)
ANALOG WAY
ANALOG WAY
ANALOG WAY
PAGE 11

Publicité

Table des Matières
loading

Table des Matières