Chapter 5 : Front Panel Display Menus Description; Introduction; Control Buttons; Status Mode - Analog way Octo Vue FX Manuel Utilisateur

Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION

5-1. INTRODUCTION

The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.

5-2. CONTROL BUTTONS

The front panel display is controlled by 2 buttons and 1 knob:
knob:
EXIT / MENU button:
ENTER button:

5-3. STATUS MODE

When switching ON, the front panel display shows the product's name and firmware versions as follows:
Device model
Device version.
MAIN output: selected input number.
Format, line & frame frequency of the selected input.
PREVIEW output: pre-selected input number.
Format, line & frame frequency of the pre-selected input
Output format.
Switching mode & output frame rate.
PAGE 26
• In the CONTROL MODE, turn this knob to scroll thru the different menus.
• In the STATUS MODE, press this button to enter in the CONTROL MODE.
• In the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
• From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
OVX831
Version _._
MAIN : 1
XGA 60.1K / 60Hz
PREVIEW : 2
YUV 15.7K / 50Hz
Output: 1024x768
Seamless #1 75Hz
OCTO VUE / QUATTRO VUE
DEVICE STATUS
MAIN STATUS
PREVIEW STATUS
OUTPUT STATUS