Rear Panel Description Of The Quattro Vue - Analog way Octo Vue FX Manuel Utilisateur

Chapter 1 : INTRODUCTION (continued)

1-9. REAR PANEL DESCRIPTION OF THE QUATTRO VUE

100-250 VAC, 1A, 50-60 Hz: AC power inlet.
O / I:
IP/LAN:
RS-232:
4 UNIVERSAL COMPUTER & TV/HDTV INPUTS:
1:
2 to 3:
4:
NOTE: All the universal inputs accept the following video source: Composite Video, S-Video, SD-YUV, RGBHV,
RGBS, RGsB & HD-YUV (HDTV)
DISPLAY OUTPUTS:
PREVIEW:
MAIN DVI:
MAIN ANALOG:
AUDIO:
1:
2 & 3:
4:
OUT:
PRELIST:
Trigger +12 V:
PAGE 14
AC power switch (O = OFF, I = ON).
LAN communication port on a RJ45 connector (optional).
RS-232 communication port on a DB9 female connector.
Universal (computer and video) input on a DVI-I female connector.
NOTE: This input accept analog & digital Computer source.
Universal (computer and video) inputs on a HD15 female connector.
Universal (computer and video) input on HD15 and 2Xbnc female connectors.
PREVIEW output on a HD15 female connector.
MAIN digital & analog output on a DVI-I female connector.
MAIN analog output on a HD15 female connector.
Unbalanced stereo audio input #1 on jack 3.5 female connectors.
Unbalanced stereo audio input #2 & #3 on MCO male connectors.
Balanced stereo audio input #4 on a MCO male connector.
Stereo audio output (balanced & unbalanced) on a MCO male connector.
Prelist stereo audio output (unbalanced) on a MCO male connector.
A room (+ 12 Vdc trigger) command (3.5 mm jack female), allows to control external
functions such as up/down screen, lighting...
OCTO VUE / QUATTRO VUE