Using The Frame Store - Analog way Octo Vue FX Manuel Utilisateur

OCTO VUE / QUATTRO VUE

4-2. USING THE FRAME STORE

This function allows memorizing up to 4 frames (images) in order to display it at any time during the show.
IMPORTANT: The output format used when displaying the frame should be the same that the output format used during
the FRAME storing.
• HOW TO STORE A FRAME:
Select the source of the frame to be stored (with the INPUT SELECTION buttons).
Select the record frame mode (LOGOS/FRAME > record frame): the device displays a white rectangle
corresponding to the frame selection area onto the output. If necessary adjust the position and size of the frame
selection area (IMAGE > pos settings).
Store the frame (LOGOS/FRAME > record frame > store). The memorization starts and will take about 2
minutes.
NOTE: For motion picture, you can use the FREEZE function, before doing the memorization.
• HOW TO DISPLAY ON or OFF the FRAME:
To display ON the FRAME, select a Frame selection button of the front panel (Fn then F1, F2, F3 or F4) then press
TAKE.
To display OFF the FRAME, select an input selection button, then press TAKE.
Chapter 4 : USING FRAME STORE AND LOGO INSERTION
PAGE 25