Input #1 Description - Analog way Octo Vue FX Manuel Utilisateur

Chapter 2 : STARTING (continued)

2-3. INPUT #1 DESCRIPTION

CONNECTION:
You can connect to this input one of the following source:
• A composite video source.
• A S.VIDEO source.
• A Component video source.
• A HD-YUV source.
• A RGBS video source.
• An analog (RGBHV, RGsB, RGBS) computer source.
NOTE: You can use the DVI / HD15 adaptor provided with the device to connect analog sources on the DVI-I (IN)
connector.
• A digital computer source.
DVI-I PIN ASSIGNMENT:
The DVI-I female connector of the device can be used with digital signals as well as analog signals. The table
hereafter explain the pin assignment of this connectors.
Function
Pin
TMDS Data 2-
1
TMDS Data 2+
2
TMDS Data 2 Shield
3
Not used.
4
Not used.
5
DDC Clock
6
DDC Data
7
Analog Vertical Sync.
8
Analog Red video (or Cr / Pr or C)
C1
Analog Green Video (or Y or composite video)
C2
Analog Bleu Video (or Cb / Pb)
C3
Analog Horizontal Sync (or composite sync)
C4
Analog Common Ground Return
C5
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
AUDIO SOURCE:
You can also connect an AUDIO stereo source on jack 3.5 connectors.
PAGE 16
Function
Pin
TMDS Data 1-
9
TMDS Data 1+
10
TMDS Data 1 Shield
11
Not used.
12
Not used.
13
+ 5V (Power)
14
Ground for (+5V)
15
Hot plug detect.
16
Function
Pin
TMDS Data 0-
17
TMDS Data 0+
18
TMDS Data 0 Shield
19
Not used.
20
Not used.
21
TMDS Clock Shield
22
TMDS Clock+
23
TMDS Clock-
24
8
1
9
16
17
24
OCTO VUE / QUATTRO VUE
C1 C2
C5
C3 C4