Device Table - MTS ATLAS Guide D'utilisation

Key

Device Table

NOTE:
Please refer to the table below when
performing the instructions in
"Programming Device Control" on page 9 or
"Programming TV/VCR Combo Control" on
page 10.
After programming, theAtlas DVR/PVR IR/UHF
Remote can control the following types of devices:
Device Key
Use PIP ON-OFF to switch the Picture-
In-Picture feature on or off (if available
on your TV).
Use PIP SWAP to switch images and
sound between the main and window
pictures.
Use PIP MOVE to move the window picture
to different positions in the main picture.
Use PIP CH+ (or CH-) to select the next
higher (or lower) PIP channel.
In the MTS mode, use VIDEO SOURCE to
view other video sources (A or B)
instead of cable.
In all other modes, use VIDEO SOURCE
to watch TV or video programs on a
desired device.
For amplifiers/receivers, use VIDEO
SOURCE to select an input source.
Controls these types of devices
VCR, TV/VCR Combo, PVR (Personal
Video Recorder), or extra DVD Player
DVD Player
Audio Amplifier, Tuner, or Receiver
Television
MTS Set-top Box
Function
7