Connecting Wires To Terminals - JVC KW-V41BT Mode D'emploi

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connection

Connecting wires to terminals

10 A fuse
See page 49.*
1
Light blue with yellow stripe (Steering remote control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
48
USB terminal (0.8 m): See page 49.*
See page 49.
*
2
Purple with white stripe
(Reverse sensor wire)
4
Light green (Parking sensor wire)
Connecting the ISO connectors
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Default wiring
* Only for KW-V41BT.
1
1
*
2 Only for KW-V215DBT.
* For KW-V41BT/KW-V21BT/KW-V11: The appearance of the aerial terminal
3
is different from the illustration.
* Only for KW-V41BT/KW-V215DBT/KW-V21BT.
4
Connect the aerial cord to the aerial
terminal.*
3
Connect to the vehicle's reverse
lamp harness when using the
optional rear view camera.
To the OE remote adapter matching your car
• If no connections are made, do not let the cable come out from the tab.
Pin Color and functions of Connector A and B
A4 Yellow
A5 Blue with white stripe
A6 Orange with white stripe Dimmer
A7 Red
Red (A7)
A8 Black
Vehicle
B1 Purple
Yellow (A4)
B2 Purple with black stripe
B3 Gray
B4 Gray with black stripe
B5 White
B6 White with black stripe
B7 Green
B8 Green with black stripe
Connect to the vehicle's parking
brake detection switch harness.
• For best safety, be sure to
3
connect the parking sensor.
Battery
Power control
Ignition (ACC)
Ground connection
Right speaker ª (rear)
Right speaker · (rear)
Right speaker ª (front)
Right speaker · (front)
Left speaker ª (front)
Left speaker · (front)
Left speaker ª (rear)
Left speaker · (rear)