Pioneer VSX-832 Mode D'emploi page 74

> Before Start > Part Names
Channel, 3D, 4K 60Hz, CEC, Extended Colorimetry
(sYCC601, Adobe RGB, Adobe YCC601), Content Type,
HDR
Audio Format
Dolby Atmos (to be supported in a future update), Dolby
TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X,
DTS-HD Master Audio, DTS-HD High Resolution Audio,
DTS 96/24, DTS-HD Express, DSD, PCM
Maximum Video Resolution
4k 60 Hz (YCbCr 4:4:4)
Video Inputs
Composite
IN1 (BD/DVD), IN2 (CBL/SAT)
Compatible input resolutions
HDMI input
4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p
Composite input
480i/576i
0 The output from the HDMI OUT jack to the TV is the
same resolution as the input. When using a TV that
supports 4K, 1080p HDMI video signals can also be
output as 4K.
Audio Inputs
Digital
OPTICAL IN (TV)
COAXIAL IN (CD)
Analog
IN1 (BD/DVD), IN2 (CBL/SAT), AUX (Front, Ø1/8z /
3.5 mm)
Audio Outputs
Analog
SUBWOOFER PRE OUT
Speaker Outputs
FRONT L/R, CENTER, SURROUND / HEIGHT L/R
(North American models are banana plug ready)
74
> Install > Initial Setup
Phones
PHONES (Front, Ø1/4z/6.3 mm)
Others
USB: 2 (Front, Rear: Ver.2.0, 5 V/500 mA)
Ethernet: 1
Setup Mic: 1 (Front)
Power consumption in standby mode
In the following cases, the power consumption in standby
mode may reach up to a maximum of 12 W:
– When "Network Standby" is set to "On"
– When "HDMI CEC" is set to "On"
– When "HDMI Standby Through" is set to other than "Off"
– When "Bluetooth Wakeup" is set to "On"
– When "USB Power Out at Standby" is set to "On"
> Playback
Advanced Setup | Supplementary Information | Others