Pioneer VSX-832 Mode D'emploi page 19

> Before Start > Part Names
(North American models)
a
c
a FM indoor antenna, b AM indoor antenna, c Ethernet cable, d Power cord
> Install
(European, Australian
and Asian models)
a
> Initial Setup > Playback
d
b
Advanced Setup | Supplementary Information | Others
5. Connect Other Cables
Antenna Hookup
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the FM indoor antenna to a wall.
Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy Network Functions such as
internet radio by connecting to the network. If you connect
by wired LAN, connect to the router with an Ethernet cable
to the NETWORK port as shown in the illustration. To
connect by Wi-Fi, after selecting "Wireless" in "3. Network
Connection" (P21) in Initial Setup, select the desired setting
method and follow the onscreen instructions to configure
the connection.
Power Cord Hookup
The power cord must be connected only after all other
connections are completed.
19
En