Led Indicators - Axis P13-E Serie Guide D'installation

AXIS P13-E Series
12 Bottom cover
13 Heaters
14 Bracket adapter
15 Bracket screws (4x)
16 Bracket adjustment screw
17 Wall bracket
18 Alternative cable hole

LED Indicators

Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
Status LED
Green
Amber
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
LED Indicators
Note
The housing LED referred to in the table below is located in the housing.
Indication
Steady green for normal operation.
Steady during startup and when restoring settings.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Steady for connection to a 10 Mbit/s network. Flashes for
network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
12