Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PROGRAMMING ELECTRONIC GRILLS
The electronic controls provide programmable HEAT and HOLD
settings for a variety of food products .
To program the electronic roller grill:
1.
With the grill on, push and hold the
side you wish to program together for three seconds until
the alarm beeps once and the display blanks.
2.
To set the heat temperature and/or heat time, push the heat
button. The last saved heat time will be displayed and the
HEAT LED will flash and HEAT TIME indicator will be ON.
Use the
and
then press the HEAT button again. The HEAT TIME LED
indicator will turn off and the HEAT TEMP LED indicator
will now be lit. When programming the HEAT temperature
is complete, push the HEAT button one more time to exit
the programming mode.
3.
To set the hold temperature, repeat step 1 above
then push the HOLD button.
temperature will be displayed and HOLD LED will be ON.
Use the
and
temperature, then press the HOLD button again to exit
programming mode.
4.
To turn the heat off to the front or rear section, press and
hold the
for that section for 3 seconds. "OFF" will be
displayed. To turn the section back on, press the HEAT or
HOLD button.
and
buttons to adjust to the desired time,
The last saved hold
buttons to adjust to the desired
Recommended Time and Temp
Product
on the
Taquitos
5-1 Hot Dogs
8-1 Hot Dogs
Recommended Time and Temp With Sneeze Guards
Product
Taquitos
5-1 Hot Dogs
8-1 Hot Dogs
Without Sneeze Guards
Heat Temp
Heat Time
Minutes
°F
°C
45
200
93
40
195
90
30
190
90
Heat Temp
Heat Time
Minutes
°F
°C
40
195
90
40
190
87
30
190
87
Hold Temp
°F
°C
160
71
150
65
150
65
Hold Temp
°F
°C
150
65
145
62
145
63
Publicité
Table des Matières
