ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
If oven is used in a new branch circuit installation
(1996 NEC), mobile home, recreational vehicle, or
where local codes DO NOT permit grounding through
the neutral (white) wire, the appliance frame MUST
NOT be connected to the neutral wire of the 4-wire
electrical system (see Figure 5):
1. Disconnect the power supply.
2. Separate the green (or bare copper) and white
appliance cable wires.
3. In the junction box:
connect appliance and power supply cable wires as
shown in Figure 5.
Cable from Power Supply
Ground Wire
Red
Wires
Ground Wire
(Bare or Green
Wire)
Junction Box
Cable from appliance
Figure 5
4-WIRE GROUNDED JUNCTION BOX
(with cooktop combination installations)
Model and Serial Number Location
The serial plate is visible when the door is opened.
When ordering parts for, or making inquires about your
oven, always be sure to include the model and serial
numbers and a lot number or letter from the serial plate
on your oven.
White Wire
Single Wall Oven
Black
Serial Plate Location
Wires
White Wire
U.L.-Listed
Conduit Connector
(or CSA listed)
6
Double Wall Oven
Serial Plate Location
Figure 6