Installing your dishwasher
B. To fi x the product at the sides (when the material of the counter top is not appropriate
for drilling)
1. Remove upper and lower caps from both side with a tool such as a fl at-head screwdriver as shown in
fi gure.
Do not remove middle caps from both side.
CAUTION
Do not discard the removed plastic caps.
CAUTION
2. Pre-drill the holes with a 2-pi drill bit to a depth of 10-12 mm and fasten the 4 screws
3. Reinstall the plastic caps to their original position.
Failing to do so may result in fi re or electric shock due to water leakage.
CAUTION
20_
Installing your dishwasher
FBI-Install_DD68-00167B-05_EN.indd 20
FBI-Install_DD68-00167B-05_EN.indd 20
4
.
4
2017-02-08
2017-02-08
1:43:43
1:43:43