EN
Control Panel Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
Menu Map
Main Level
STATIC
DIMMER
RUNMODE
POWER MODE
ADDRESS
DIMMER
CURVE
PERFORM
SLOCK
SETTING
PERSONALITY
DMX ERROR
RESET
MODE
SETTING
PWM
VERSION
INFO
RDM
3
QUICK REFERENCE GUIDE
Programming Levels
DMX512
SLAVE
DMMR
SENS
575W
750W
001–512
KEY
CURVE1
CURVE2
CURVE3
STUDIO
Pass code:
18000Hz
25000Hz
UID
LABEL
Description
0–100
Manual control of output
Sets the mode to DMX control
Sets the mode to master/slave
Sets the mode to dimmer control, which turns off
data input
Automatically chooses between dimmer and DMX
Matches output to 575 W incandescent fixture
Matches output to 750 W incandescent fixture
Sets the starting address
ON
Sets the key lock (passcode mode)
OFF
OFF
Linear dimmer
DIM1
Slow (DIM4) to fast (DIM1) dimmer speeds. For
DIM2
best performance while using on a dimmer, set
DIM3
this to DIM4.
DIM4
OFF
No dimmer curve
Large (CURVE3) to small (CURVE1) dimmer
curves. For best performance while using on a
dimmer, set this to CURVE3.
Balances LED cooling using fans and output
LIVE
power level
Maintains LED cooling by limiting power level
ON
SETTING menu level access lock
OFF
UNO
DOS
Selects DMX personality
STD.P
SAVE
Continues last command upon loss of DMX signal
BLACK
Blacks out product upon loss of DMX signal
Resets product to factory defaults
SELF
No DMX output from product in standalone
MAST
Sends DMX output in standalone mode
600Hz
1200Hz
2000Hz
2400Hz
Sets the Pulse Width Modulation frequency
6000Hz
V_ _
Displays product firmware version
_ _ _ _ _
Displays product UID for RDM
_ _ _ _ _
Displays product label for RDM
Ovation ED-200WW QRG Rev. 1