META SMARTACT Instructions D'utilisation page 8

CONNECTING THE HANDPIECE TO THE FOOTSwITCH
Photo. 8
Connect the footswitch to the compressed air
supply. Use a European Standard pressure
reducer .
1
Photo. 10
Cable for connecting the footswitch to the hand-
piece.
Photo. 12
Place the terminal inside the cavity located on
the upper part of the footswitch.
The female pressure reducer is an optional device not included in the scope of delivery.
1
8
Photo. 9
Set the operating pressure not less than 2 bar
(max. pressure 6 bar).
NO
Photo. 13
Slide the ring nut horizontally towards the circu-
lar housing.
Smartact
Min 2 Bar Max 6 Bar
Photo. 11
Insert the terminal of the cable in the footswitch.
Photo. 14
Smartact