META SMARTACT Instructions D'utilisation page 7

products or components returned as part of the process become the prop-
erty of the manufacturer. The warranty is not extended as a result of any
action by the manufacturer under the terms of the warranty. Therefore, if a
product or component is changed, the new product or component supplied
is not covered by a new period of warranty. These items are guaranteed
under the terms of the original warranty valid from the date of purchase of
the original goods. All other rights are excluded.
Enclosure 1 - Assembling the device
ASSEMBLING THE HANDPIECE
A
B
Photo. 1
Curved body (a) and insertion device (b).
Photo. 3
Torque wrench.
Photo. 6
Insert the curved body assembly (photo 5) in
the handle.
Smartact
These user instructions, together with further information concerning Smart-
act and instructions for assembling and disassembling the device are avail-
able on our website www.metahosp.com
Please take the time to read this information to prevent any errors and en-
sure good operation of the product.
NO
Photo. 4
Use the special torque wrench supplied (photo
3) to screw up fully.
Photo. 7
Screw up fully (photo 6). The curved body must
be facing downwards as shown in the photo-
graph.
Smartact
Photo. 2
Insert the insertion device inside the curved
body (photos 1 and 2).
Photo. 5
Curved body assembly.
7