CMF SpinaLogic Manuel page 14

EN
Troubleshooting Information, continued
PROBLEM
The device will not turn on, but
there is no error message . You may
still hear a beep .
There are lines or bars on the
display or the display is too dark
to read .
You do not hear any beeps .
The device appears damaged .
Your broken bone hurts more than
it used to .
You run out of batteries .
12
ACTION TO BE TAKEN
1 . Try replacing the batteries with
new ones .
2 . Wait until tomorrow and try
treating again .
3 . If the device still will not turn on,
call Customer Care .
Call Customer Care .
1 . The beeper may not work if you
live where it is very humid . The
device will still work .
2 . If you do not live where it is
humid, listen again tomorrow
for beeps . Have somebody else
listen too .
3 . If the device still does not beep,
call Customer Care .
Call Customer Care .
1 . Make sure that you are treating
in a comfortable, relaxed posi-
tion .
2 . If you still have more pain than
you used to, call your doctor .
Call Customer Care .