Function Test - Kopp Free-control Mode D'emploi

GB

Function test

Variant 1: Conclude installation and program-
ming procedure (1-channel, 3-wire wireless
receiver). Then, open the windows.
Then, the wireless magnetic sensor should
switch the 1-channel/3-wire wireless receiver
on. As soon as the 1-channel/3-wire wireless
receiver is switched on, the extractor hood
can be operated.
If the window is closed, the wireless magnet-
ic sensor transmits a switch-off signal, the
1-channel/3-wire wireless receiver is switched
off, and the power supply to the extractor
hood is interrupted.
Variant 2: Conclude installation and program-
ming procedure (wireless adapter).
Then, open the windows.
Then, the wireless magnetic sensor should
switch the wireless adapter on.
As soon as the wireless adapter is switched
on, the extractor hood can be operated.
If the window is closed, the wireless magnetic
sensor transmits a switch-off signal, the wire-
less adapter is switched off, and the power
supply to the extractor hood is interrupted.
74
7
5