Lindy 38343 Manuel Utilisateur page 9

User Manual
Audio Signal Output Switching
The push button on each unit allows for easy switching of the output audio signal source. The ARC &
SPDIF LED indicate the applied source.
ARC LED SPDIF LED
ON OFF
ON ON
OFF ON
OFF OFF
Important! Before starting the installation, please ensure that all devices are powered off.
1. Connect an HDMI source device to the Transmitter unit using an HDMI cable.
2. Connect one end of the Cat.6 cable to the HDBaseT Out port on the Transmitter and the other end to
the HDBaseT In port of the Receiver. U/UTP or F/UTP installation cables are recommended. For cable
lengths please see the Specifications of this manual.
3. Use another HDMI cable to connect an HDMI display device to the HDMI output port on the Receiver
unit.
4. Plug the DC power supply into either the Transmitter or Receiver and switch on.
5. Power on the source device and display to complete the installation.
In addition to the installation steps outlined above this HDMI 18G KVM Extender can also provide the
following additional/optional functionality:
USB
The Transmitter feature a USB Type B port for the connection to a USB source such as a PC or laptop.
The receiver feature two USB 2.0 Type A ports to connect a keyboard, mouse or other devices to control
the source connected to the transmitter.
RS-232 Serial
The Transmitter and Receiver both feature a phoenix block serial connection for the extension of control
signals.
Infrared Control
The Transmitter and Receiver units both feature an IR
In and Out port, with two pairs of IR extension cables
provided. The extension cables allow an IR remote
control to be used from the Transmitter to the Receiver
or vice versa.
The TosLink OUT, 3.5mm OUT and HDMI IN ports on the transmitter
simultaneously output the audio signal returned from HDMI
(displaydevice) on the receiver.
The TosLink OUT and 3.5mm OUT ports output the audio signal
returned from TosLink IN on the receiver.
The TosLink OUT and 3.5mm OUT ports output the audio signal
returned from TosLink IN on the receiver.
The TosLink OUT and 3.5mm OUT ports output the audio signal
extracted from the transmitter.
Audio Signal Source
English