Newage 65901 Manuel D'installation Et D'utilisation page 7

To access the injector orifice for the sear burner,
7
the protective cover (C) must be removed.
Remove the three bolts securing the cover.
C
To access the rotisserie injector, begin by
9
5
removing the 6 bolts holding on the back panel
on rear of grill.
Locate the orifice location inside back of
11
5 rotisserie (C). Apply pipe dope to the propane
injector thread and hand tighten into position.
C
12
www.newageproducts.com
Remove the sear burner by tilting and lifting
out. Apply pipe dope to the propane orifice
8 5
thread (avoid end two threads). Hand thread
in and tighten with a 6mm nut driver.
10
5
Remove the back panel and set aside.
12
Finish tightening using a 6mm open wrench.
5
Re-attach back panel following reverse order
13
5
of Step 9 and 10.
Reinstall the grill grates, ceramic briquette
15
trays, and rotisserie.
3
www.newageproducts.com
Re-insert the burners and attach the bolts (A)
14
5
securing the burners with the bolts.
A
13