CONTINENTAL EDISON CEME20BI Guide D'utilisation page 33

TO GUARANTEE AN EXCELLENT TASTE FROM THE FIRST CUP OF COFFEE,
YOU MUST RINSE THE APPLIANCE WITH HOT WATER AS BELOW:
1.
Pour water into the water tank, the water level must not exceed the "MAX"
mark in the tank. Then replace the water tank cover.
Note : the device has a detachable tank for easy cleaning. You can first fill the
tank with water and then put the tank in the device.
2.
Put the coffee filter (E) in the metal filter holder (D) without coffee.
3.
Place a cup under the filter holder. Make sure the steam button is in the
"off" position. ".
4.
Connect the device to a power source. Press the «On / Off button onc
The red indicator lights up. The lights «touch 1 cup of coffee
« Touches 2 cups «f coffee
once all the lights are on continuously, preheating is complete.
Note : if preheating has not yet been completed, press the «button 1 cup of
coffee » Or «button 2 cups of coffee
rapidly. If the pump is not running, press this button again, its indicator will
return to the preheating state.
5.
Press the «button 2 cups of coffee
about 25 seconds, pour the water into the cup and then clean them
thoroughly. The appliance is now ready to make coffee.
Note : Noise may be emitted when water is pumped for the first time. This
phenomenon is normal, the appliance releases the air present inside. After
about 20 seconds, the noise disappears.
»Flash, the machine starts preheating,
», Its indicator light flashes
», the appliance will pump water for
EN-13
»,
e.
»,