Introduction - Toro 22601 Manuel De L'opérateur

WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
DANGER
There may be buried power, gas, and/or telephone
lines in the work area. Shock or explosion may
occur if you dig into them.
Have the property or work area marked for buried
lines and do not dig in marked areas. Contact your
local marking service or utility company to have the
property marked (for example, in the United States,
call 811 for the nationwide marking service).
This spark ignition system complies with Canadian
ICES-002.
Because in some areas there are local, state, or federal
regulations requiring that a spark arrester be used on the
engine of this machine, a spark arrester is available as
an option. If you require a spark arrestor, contact your
Authorized Toro Service Dealer.
Genuine Toro spark arresters are approved by the USDA
Forestry Service.
Important: It is a violation of California Public
Resource Code Section 4442 to use or operate
the engine on any forest-covered, brush-covered,
or grass-covered land without a spark arrester
muffler maintained in working order, or the engine
constricted, equipped, and maintained for the
prevention of fire. Other states or federal areas may
have similar laws.
The enclosed Engine Owner's Manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California
Emission Control Regulation of emission systems,
maintenance, and warranty. Replacements may be
ordered through the engine manufacturer.
© 2010—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Introduction

This machine is designed to grind and remove tree
stumps and surface roots. It is not intended to cut rock
or any other material other than wood and the soil
around a stump.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
illustrates the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1
1. Model and serial number plate
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
2
g014868
Figure 1
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved