Niko 10-577 Mode D'emploi page 47

3.2. Configuration with the service unit 10-870
The internal video unit works like an intercom.
Please use the commands under control function 9 to establish the configuration.
Find intercom
Function button
Call forwarding
Automatic door opener
Internal call
Control function 8
Light switch button
Internal call 2
Control function 9
Switch lights on/off
Switch on call forwarding parallel
Switch off call forwarding parallel
SN = serial number (internal unit)
SNForw = serial number (internal unit to forward to)
SNInt = serial number (internal unit to be called)
SNPar = serial number (internal unit to which a newly configured new internal video unit is assigned)
4. OPERATION
4.1. 2-way communication
4.1.1. Activate 2-way communication
• The 2-way communication is automatically activated when you answer a call.
When there is a lot of background noise, you can override the 2-way communication by pressing and holding the talk button (walkie-talkie function).
4.1.2. 2-way communication
• Press the talk button to talk to the visitor via the external video unit.
• Release the talk button to hear the visitor via the external video unit.
• Press the do not disturb button to end the call.
4.2. Setting volumes
Adjustable in 4 levels
Speech volume
During a speech connection: press the volume button repeatedly until the desired volume has been reached.
Ringtone volume
When there is no speech connection: press the volume button repeatedly until the desired volume has been reached.
The ringtone will play once the volume level has been set.
EN
52
90 SN SNForw
91 SN
92 SN SNInt
93 SN
94 SN SNInt
95 SN
96 SN
99 SN SNPar
99 SN o
10-577
47