Setting The Sleep Timer; Sleep - Aiwa CSD-MD5 Mode D'emploi

4
Select the duration for the timer-activated
period with JOG DIAL and press ENTER.
(Example: Timer play)
(Example: Timer recording)
The duration for the timer-activated period can be set
between 5 and 120 minutes in 5-minute steps.
5
Adjust the volume with JOG DIAL and press
ENTER.
The volume level is adjusted from 0 to 20.
6
Prepare the source.
To listen to a CD, load a CD.
To listen to an MD, insert an MD.
To listen to the radio, tune in a station.
To record from the radio, tune in a station and insert
an MD.
7
Press POWER to turn the unit off.
5 remains on the display after the power is turned off
(timer-standby mode).
When the timer-on time is reached, the unit turns on.
To check or change the specified items
Press TIMER on the remote control then press ENTER
within 4 seconds. Each time ENTER is pressed, each item is
displayed.
If you want to change the specified items, press r or t.
To cancel timer standby mode temporarily
Press TIMER repeatedly so that TIMER OFF is displayed.
To use the unit in timer standby mode
You can use the unit normally.
Before turning the unit off, repeat step 6 to prepare the
source.
MD < REC TIME is displayed when:
The duration for the timer-activated period is longer than the
remaining recordable time of the MD.
NOTE
• If the unit is left for one minute at steps 2 and 5, the timer
setting mode is canceled.
• Timer play and timer recording will not begin unless the
power is turned off.
• During operation r and t are also available instead
of JOG DIAL.

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a specified time.
1
1
Press SLEEP.
2
Within 4 seconds, turn JOG DIAL to specify the
time until the power is turned off.
The time changes between 5 to 120 minutes in 5-minute
steps.
Specified time

SLEEP

To check the time remaining until the power is turned off
Press SLEEP once. The remaining time is displayed for 4
seconds.
To cancel the sleep timer
Press SLEEP twice so that SLEEP OFF is displayed.
NOTE
During operation r and t are also available instead of
JOG DIAL.
r, t
2
En
E
F
23
ENGLISH