Operating Principle And Limits Of Electric Fences For Animals; Operating Principle Of The Electric Fence Energiser; Practical Tips - VOSS PET fenci M03 Mode D'emploi

• Provide people with access through the fence to public paths using insulated gates,
gate handles or insulated crossing points (stiles) at all points where access is intended.
• Always use a gate or access point that is specifically intended for that purpose.
Access points along public paths and any other place where there are people should
be fitted with warning signs about every 100 m.
• Keep a minimum distance of 2.5 m between the electric fence and grounded, metallic
objects (e.g. water pipes, troughs), especially if it is an area where people may be
present.
• If there is a danger of flooding around the electric fence, stop using the energiser.
• If the pulse interval is less than 1 second, shut down the energiser immediately and
have it repaired if necessary. A pulse interval of over 1.6 seconds means that the
energiser is no longer providing sufficient security and requires inspection.
This device meets the requirements of EC directive 2004/108/EC "Electromagnetic
Compatibility" (CE mark) and European safety standard EN 60335-2-76 (Electric Fence
Energisers).
Prevent misuse of the energiser by:
• Paying attention to markings on the device
• Securing it against unauthorised access (e.g. anti-theft protection, child protection)
if necessary in the installed location.
• Special applications of electric fences in zoos or wildlife enclosures: Installation
of such systems may only be carried out qualified electricians. A non­electric fence
must be present to separate visitors from the electric fence.
• If the mains connection lines to the energiser are damaged, then these must be
replaced by the manufacturer, the manufacturer's customer services or another
similarly qualified person in order to avoid injury.
• Servicing and repairs may only be carried out by authorised specialists.
Only replacement parts authorised by the manufacturer may be used.
DE

OPERATING PRINCIPLE AND LIMITS OF ELECTRIC FENCES FOR ANIMALS

An electric fence consists of an energiser and an insulated fence. The energiser
supplies the fence with short electrical pulses. The electric fence presents a
"physical" and "psychological" barrier to animals. The short high-voltage pulses
are very unpleasant and animals will quickly learn to respect the electric fence.
A properly installed electric fence can provide a high level of safety and has many
advantages compared to a purely mechanical fence. As a psychological barrier, the
electric shock discourages animals from trying to get over the fence. Less work and
fewer materials are required, alterations are easily made, it is suitable for a very
wide range of animals and offers a great deal of protection against injury.

OPERATING PRINCIPLE OF THE ELECTRIC FENCE ENERGISER

The electric fence energiser emits an electrical pulse through the fence about once
every second. The pulse gives the animal a short, sharp, yet harmless shock. This is
in no way dangerous for the animal, but is enough that it will remember to avoid
the fence in future.

PRACTICAL TIPS:

Check regulations for your local area before building a fence. You may require
permission to do so.
Regularly check the energiser to ensure that it still functioning properly by looking
at the flashing indicator LED.
Check the fence system regularly. Remove any fallen branches, weeds or bushes as
these may cause a short circuit and reduce the effectiveness of the fence.
All animals will need time to learn to respect the fence. Training may take several days
and you may need to make some small adjustments to the fence.
Animals that can jump may be difficult to fence in. You may need to increase the height
of the fence in order to ensure maximum effectiveness.
Make sure to use high-quality insulators. Cheap or cracked insulators and plastic tubes
are not recommended as these can cause short circuits.
UK SE NL FR