Using The Controls - Hamilton Beach Commercial HBF1100 Manuel D'utilisation

Using the Controls

6
Variable Speed Control
Speeds 1–10. Works with VARIABLE or CHOP functions.
HIGH
Speed starts LOW and ramps to HIGH.
VARIABLE
Works with Variable Speed Control.
CHOP
Works with Variable Speed Control.
PULSE
Press and hold for desired time.
P1 and P2
Preset program buttons. P1 and P2 can be changed to a different
preprogrammed cycle.
Interlock Lid Indicator Light
The red light will flash when lid is not in place.
The red flashing light will stop when lid is in place and blending can
start.
Thermal Overload Protection
Temperature gauge alerts operator if motor overheats while blending
back-to-back batches.
LED Lighted Preset Timer Panel
Programmed for 30 seconds, 1 minute, 2 minutes, and 3 minutes.
NOTE: 3 minutes is the default setting.
STOP
Press STOP or any button to stop operating.