Standby Mode - Marantz DH9500 Manuel De L'utilisateur

• Connect the red plug of the supplied audio lead to
the red Analogue Audio Out 1 socket on the back
of the Music Server. Connect the adjacent white
plug to the white Analogue Audio Out 1 socket on
the Music Server. Connect the other end of this
cable to the AUX or CD inputs on your amplifier.
• Connect the yellow plug of the supplied TV lead to
the yellow Video Out socket of the Music Server.
For the European TV lead* connect the Scart plug to
the ext. 1 or 2 socket on the rear of your TV. For the
non-European TV lead connect the yellow plug to
the video input on the rear of your TV.
• Connect the supplied power cord to your mains
power supply.
• Switch on your television. Select the appropriate
video channel to view the Music Server TV user
interface display.
* For Scart connection, the red and black plugs are not
required.
SWITCHING ON AND OFF
There are two power saving modes available from the
POWER/Standby button on the Music Server front panel
and the L button on the remote control.
If you are not using your Music Server it is strongly
recommended that you place the unit into one of the two
power saving modes.

Standby mode

Standby mode should be used when the Music Server is not
being used for a short period of time. Putting the unit into
standby takes just a few seconds; switching the unit on from
standby also takes just a few seconds. Do not remove the
power from the Music Server in this mode.
Off mode
Off mode should be used when the Music Server is not
being used overnight (or for several days). There is a short
wait whilst the unit is switched to off mode; switching the unit
on from off mode may take a few minutes. When the unit is
in off mode it consumes very little power. You can safely
remove the power from the Music Server in this mode.
To enter standby or off mode
• Press the POWER/Standby key on the front panel
or the L Standby key on the remote control.
The following prompt is displayed:
The front panel display shows:
Enter standby mode
or switch off?
‘ ªOff”Stby
Either:
• Press the Stby action key on the front panel or the
key on the remote control to switch to standby.
After a short delay the TV screen shows:
Or:
• Press the Off action key on the front panel or the 3
key on the remote control to switch to off mode.
After a short period of time the TV display and front panel
display will switch off.
To switch on from standby or off mode
• Press the POWER/Standby key on the front panel
or the L Standby key on the remote control.
TV SCREEN AND FRONT PANEL DISPLAY
The following diagram shows the key features of a typical
Music Server TV screen and front panel display:
1. Indicates the title of the current screen.
2. Title of the current selection, shown highlighted on
the TV screen.
3. Indicates that you can use the 9 or 8 keys to
browse up and down the current menu list.
4. Indicates that you can press the 7 key to look inside
the currently selected item, such as to show the tracks
in an album, or the albums by an artist or in a genre.
5. Action keys available from the current menu for
selection or navigation.
12