Demo Mode; Hdmi Connection - Grundig GSB 950 Mode D'emploi

CONNECTION
Dolby­Atmos®
Dolby Atmos gives you amazing experience you
have never before by overhead sound, and all
the richness, clarity, and power of Dolby sound.
For­using­Dolby­Atmos®
1­­
Dolby Atmos® is available only in HDMI
mode. For the details of the connection,
"HDMI­CONNECTION".
please refer to
To use Dolby Atmos® in HDMI 1 and HDMI 2
mode, your TV has to support Dolby Atmos®.
2­­ Make sure that "No Encoding" is selected for
bitstream in the audio output of the connected
external device (e.g. Blu-ray DVD player, TV
etc.).
3­­ While entering Dolby Atmos / Dolby Digital
/ PCM format, the soundbar will show
DOLBY­ ATMOS­ /­ DOLBY­ AuDIO­ /­
PCM­AuDIO.
Tips:
▪
The full Dolby Atmos experience is only
available when the Soundbar is connected to
the source via a HDMI 2.0 cable.
▪
The Soundbar will still function when
connected via other methods (such as a
Digital Optical cable) but these are unable to
support all of the Dolby features. Given this,
our recommendation is to connect via HDMI,
in order to ensure full Dolby support.
­ 2 8 ENGLISH
­ - ---------------------------------------------------------------------------------------------------------------------
HDMI (ARC)
OR
HDMI IN
Demo­mode:
In standby mode, Long press
-)
button on soundbar at the same time. The
soundbar will power on and demo sound can be
activated. The demo sound will play around 20
seconds.
Note:
1­­When demo sound be activated, you can press
button to mute it.
2­­ If you want to listen the demo sound longer,
­­to repeat the demo sound.
you can press
3­­ Press (VOL­ +) or
decrease the demo sound volume level.
4­­ Press button to exit demo mode and the unit
will go to standby mode.
HDMI­Connection
Some 4K HDR TVs require the HDMI input
or picture settings to be set for HDR content
reception. For further setup details on HDR
display, please refer to the instruction manual of
your TV.
Using HDMI to connect the soundbar, AV
equipment and TV:
Method­1:­ARC­(Audio­Return­Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant
TV to your sound bar through a single HDMI
(VOL­+) and (VOL­
(VOL­ -) to increase or
HDMI OUT
AV equipment