AuX/OPTICAL/COAXIAL/HDMIOPERATION
1Ensure that the unit is connected to the TV or
audio device.
2
Press the
(SOURCE)button repeatedly on
the unit or the
AuX, OPT/COA, HDMI
1/2, HDMI
ARC buttons on the remote
control to select the desired mode.
3
Operate your audio device directly for play-
back features.
4
VOL +/–
Press the
ume to your desired level.
Tip:
▪
The unit may not be able to decode all digi-
tal audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is
PCM orDolbyDigital
set to
user manual of the input source device for its
audio setting details) with
2/HDMIARC/optical/coaxial
▪
In
HDMI 1 / HDMI 2
DOLBYATMOS
Soundbar display shows
When the DOLBYDIGITALaudio format is entered,
the Soundbar display shows
When the PCM audio format is entered, the
Soundbar display shows PCMAuDIO.
When entering non-PCM or DOLBY DIGITAL
audio formats, if there's no sound output from
the unit and the display show
FORMAT.
3 2
ENGLISH
button to adjust the vol-
(Refer to the
HDMI1/HDMI
input.
mode, when the
audio format is entered, the
DOLBYATMOS.
DOLBYAuDIO.
NONSuPPORT
--