Technical Specifications - Trevi DAB 7F90 R Guide Rapide

Signal Strength: displays information about the signal strength via
a bar on the display, the more the signal is stronger, the bar becomes
full.
Time/Date: displays information relating to the hours and date of
the current transmission.
RADIO DAB/DAB+/FM MENU
1. In DAB or FM radio mode, hold down the INFO/MENU button (8) for
a few seconds;
2. Press > (4) or < (9) button and select the desired item from:
DAB mode: Manual tune, Station Order, Sleep, Factory Reset, FW Version;
FM mode: Factory reset, Sleep, FW Version;
3. Press SELECT button (3) to enter the settings of the selected item.
Manual tune: allows you to manually scan a single DAB/DAB+
frequency. Press > (4) or < (9) button to select the channel number
relating to the frequency to be scanned and then press the SELECT
(3) key to start the scan.
Sleep: To set the auto-off (Sleep off, 10min, 30min, 60min and 90min).
Factory Reset: allows you to reset the device to the factory settings.
At the end of the reset an automatic scan of the DAB/DAB+ stations
will be performed. Move with > (4) or < (9) button to YES and confirm
with the SELECT button (3).
FW version: allows you to view the software version of the device.

TECHNICAL SPECIFICATIONS

Power: .........................................................
.....................................................................
DAB/+ band: .............................................
FM band: ....................................................
Speaker: ......................................................
Power Output: ..........................................
Size: ..............................................................
Rech. Li-ion Battery 800mAh
3x 1,5V "AAA" size
174 - 240 MHZ
87,5 - 108 MHZ
1,5 pollici, 8Ω
0,8W RMS
58x120x22mm