Atag KA2211DC Notice D'utilisation page 155

REMOVING THE FRIDGE ACCESSORIES
1. Remove the spill Proof Glass Shelf by pulling the shelf out as
far as it will go. Then, gently lift it up and gently remove it.
2. Remove the Vegetable & Fruit Drawer by pressing on the
indentations found on the inside left and right sides of the
Veggie Box/Dry Box cover and remove by pulling forward.
Holding the drawer with one hand, lift it up a little bit while
pulling it forward and take it out of the refrigerator.
3. Remove the Gallon Door Bin by holding the bin with both
hands and gently lifting it up.
4. The Z Shelf is attached to the cabinet wall.
Remove the wine shelf by sliding it up and gently lifting the
shelf out of the tabs.
Ensure that the Z shelf is fitted as shown in the
diagram and not upside down.
Before removing any accessories, make sure that no food is in the way.
When possible, remove the food altogether to reduce the risk of accidents.
To get the best energy efficiency of this product, please leave all selves, drawers and baskets
on their original position like as illustration in page (30)
_35
operating