Setting Up Your Side-By-Side Refrigerator; Getting Ready To Install The Refrigerator - Atag KA2211DC Notice D'utilisation

setting up your side-by-side
refrigerator refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on the purchase of your Side-By-Side Refrigerator.
We hope you will enjoy the many state-of-the-art features and efficiencies that this new appliance has to offer.
Selecting the best location for the refrigerator
- If your refrigerator is not level, the internal cooling system may not work correctly.
- Overall space required in use. Refer to drawing and dimension as below.
25mm
To prevent floor damage be sure the front levelling
legs are in the up position (above the floor). Refer to
'Levelling the refrigerator' in the manual (at page 14).
To protect the finish of the flooring, place the
protection sheet such as packing carton under the
refrigerator.
When installing, servicing or cleaning
behind the refrigerator, be sure to pull the
unit straight out and push back in straight
after finishing.
10_
setting up
25mm
at least 50mm
at least 50mm