Using Your Blender - Hamilton Beach Professional B79 Manuel D'utilisation

Using your Blender

Before first use: After unpacking the Blender, follow the instructions in "Cleaning Your
Blender."
IMPORTANT: The Blender Jar and Cutting Blade Assembly are subject to wear during
normal use. Always inspect Jar for nicks, chips, or cracks. Always inspect Cutting Blade
Assembly for broken, cracked, or loose blades. If Jar or Cutting Blade Assembly is
damaged, do not use.
1
Place Blender Jar on Base.
3
Place Lid and Emulsion Cup on Jar.
Insert the Cup into the Lid and secure by
turning clockwise. Remove the Emulsion
Cup to use the Tamper or to add
ingredients.
8
2
Add ingredients.
4
Plug in Blender. Move the RESET/OFF
(I/ ) Switch to the RESET (I) position
to turn on power to the Blender and
ready it for blending. The front lights
will illuminate. Move the RESET/OFF
(I/ ) Switch to the OFF ( ) position
anytime the machine is left unattended.
If Blender is plugged in and Switch is in
RESET (I) position, but panel lights are
not illuminated, the Blender has entered
standby mode. This will happen after 3
minutes of inactivity. Press any control
panel button or Switch to resume normal
operation.